Component Diagram
Short Spring Plunger – Steel with Standard End Force
Product Description
Steel Short Spring Plungers, Standard End Force, Inch
Add “P” to end of part number for optional nylon patch. Not available in 4-48 through 8-36 sizes. Do not use the nylon patch if threading into soft material such as aluminum.
Steel Nose P/N |
Nylon Nose P/N | Thread (A) | Body Length (B) | Nose Length (C) | Nose Dia (D) | Start End Force (lbs) | End End Force (lbs) |
|---|---|---|---|---|---|---|---|
| SW10-2AS | SWN10-2AS | 8-32 | 0.437 | 0.052 | 0.070 | 1.5 | 4.7 |
| SW10-2S | SWN10-2S | 8-36 | 0.437 | 0.052 | 0.070 | 1.5 | 4.7 |
| SW10-3S | SWN10-3S | 10-32 | 0.468 | 0.065 | 0.093 | 1.7 | 6.2 |
| SW10-4S | SWN10-4S | 1/4-20 | 0.531 | 0.078 | 0.119 | 3.0 | 10.5 |
| SW10-5S | SWN10-5S | 5/16-18 | 0.562 | 0.084 | 0.135 | 3.7 | 15.5 |
| SW10-6S | SWN10-6S | 3/8-16 | 0.625 | 0.110 | 0.186 | 4.5 | 18.5 |
| SW10-8S | SWN10-8S | 1/2-13 | 0.750 | 0.151 | 0.248 | 5.0 | 28.5 |
| SW10-10S | SWN10-10S | 5/8-11 | 1.062 | 0.215 | 0.310 | 7.0 | 50 |
